ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
1110313-INS-RB
•
PAGE 2
Step 1
Starting on the driver side, locate
the mounting points on the vehicle.
Remove any existing hardware.
On the side attachment, use a 1/2" spacer,
an M8 bolt, lock washer and flat washer to
secure the bracket to the vehicle.
On the top attachment, use a 5/8"
spacer, a 1/2" spacer, two M6 bolts,
lock washers and flat washers to
secure the bracket to the vehicle.
Repeat on the passenger side.
M6 bolt
M6 bolt
M6 lock washer
M6 lock washer
M6 flat washer
M6 flat washer
1/2"
spacer
1/2"
spacer
5/8"
spacer
M8 lock washer
M8 bolt
M8 flat washer
Step 3
Congratulations on the installation
of your new ARIES LED light bar brackets.
With the brackets installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on page one.
Step 2
To install a 50" LED light bar (part# 1501278
- sold separately), use two 1/4" carriage bolts,
flat washers and nylock nuts per side at each
mounting location.
