Aries 1500100 Installation Manual Download

Page: 4 / 4

ARIESAUTOMOTIVE.COM

•

NEED ASSISTANCE? •

877.287.8634

• 1500100-INS-R

• PAGE 4

Step 6

Attach the door strap to the hook

located on the inside of the vehicle.

Step 7

To install the factory mirrors, locate

and remove the plugs in the three mirror

mounting holes in the tube door.

Align the mirror with the mounting holes

and secure with the provided M6 screw,

flat washer and lock nut.

Step 8

Repeat steps 1 through 7 for

the passenger side tube door.

With the doors installed, periodic

inspections should be performed to

ensure all hardware remains tight.

To protect your investment, see the

'Notes and Maintenance' section on

the first page of this instruction manual.

Congratulations on the installation

of your new ARIES tube doors.

Summary of Contents for 1500100

Page 1: ...s and scuffs on the finish Mild automotive detergent may be used to clean the product Do not use dish detergent abrasive cleaners abrasive pads wire brushes or other similar products that may damage t...

Page 2: ...he vehicle Set the mirrors aside to be re installed on the tube doors Step 2 Locate the door strap on the inside of the vehicle Remove the strap from the hook CAUTION Once the strap is released the do...

Page 3: ...ry latch is aligned properly with the factory door strike With the rotary latch in the open position line up the latch with the factory door strike and gently close the door It may be necessary to loo...

Page 4: ...tube door Align the mirror with the mounting holes and secure with the provided M6 screw flat washer and lock nut Step 8 Repeat steps 1 through 7 for the passenger side tube door With the doors instal...