PAGE 1 • 204032-INS-RA • 800.798.0813 • NEED ASSISTANCE?
•
ARIESAUTOMOTIVE.COM
Product Image
Brackets and Hardware
Passenger Side
Front Mounting
Bracket
Driver Side
Front Frame Bracket
Driver Side
Rear Support Bracket
Driver Side
Rear Frame
Bracket
Driver Side
Front Mounting
Bracket
Passenger Side
Front Frame Bracket
Passenger Side
Rear Support Bracket
Passenger Side
Rear Frame
Bracket
(2) M12 x 40mm Long Bolt
Plates
(6) M12 x 40mm Long
Bolt Plates W/Welded
Washer
(2) M12 x 45mm
Short Bolt Plates
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may
contain abrasives that could damage the finish.
For gloss black finishes, mild soap may be used to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Scan
for helpful
install tips
Front
Rear
INSTALLATION MANUAL
204032
Torque Specifications
M
E
T
RIC
M6 bolt
3 ft.-lbs.
M8 bolt
7 ft.-lbs.
M10 bolt
16 ft.-lbs.
M12 bolt
28 ft.-lbs.
SA
E
1/4" bolt
3 ft.-lbs.
5/16" bolt
7 ft.-lbs.
3/8" bolt
16 ft.-lbs.
7/16" bolt
20 ft.-lbs.
1/2" bolt
28 ft.-lbs.
Parts List
1
Driver / left, side bar
1
Passenger / right, side bar
1
Mounting bracket, driver / left, front
1
Mounting bracket,
passenger / right, front
1
Frame bracket, driver / left, front
1
Frame bracket,
passenger / right, front
1
Frame bracket, driver / left, rear
1
Frame bracket,
passenger / right, rear
1
Support bracket, driver / left, rear
1
Support bracket,
passenger / right, rear
6
Bolt plate, long, welded washer
M12 - 1.75 x 40mm
2
Bolt plate, long, M12 - 1.75 x 40mm
2
Bolt plate, short, M12 - 1.75 x 45mm
4
Hex bolt, M12 - 1.75 x 35mm
10
Flat washer, M12 x 25mm x 2.5mm
8
Flat washer, M12 x 30mm x 3mm
14
Lock washer, M12
14
Hex nut, M12
10
Plastic spacer washer, M12
8
Hex bolt, M10 - 1.50 x 25mm
2
Hex bolt, M10 - 1.50 x 35mm
4
Flat washer, M10 x 20mm x 2mm
8
Flat washer, M10 x 25mm x 2mm
10
Lock washer, M10
2
Hex nut, M10
