PAGE 3 • 2051101-INS-RA • 800.798.0813 • NEED ASSISTANCE?
•
ARIESAUTOMOTIVE.COM
Step 5
Attach the running board to the brackets
using six 8mm lock washers, six 8mm
flat washers and six 8mm nuts.
Snug the hardware,
but do not fully tighten.
Step 6
Adjust the running board, centering
it between the front and rear wheel wells.
With the running board in position, it is
recommended that all brackets first be
tightened to the vehicle, followed by the
running board connections.
Step 7
Repeat steps 1 through 6 on the
passenger side of the vehicle.
Congratulations on the installation
of your brand new ARIES AeroTread
™
running boards.
With the running boards installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on the
first page of this instruction manual.
