ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
2051179-INS-R
B
•
PAGE 3
Step 5
Remove the M8 nuts, lock washers
and flat washers from the running board.
Place the running board onto the brackets
and align the M8 bolts with the slots in the
brackets on the vehicle.
Attach the running board to the
brackets using the provided hardware.
Snug the hardware,
but do not fully tighten
Step 6
At this time, adjust the running board
to the desired location.
With the running board in position,
it is recommended to tighten all
brackets to the vehicle first, followed
by the running board connections.
For recommended torque specifications,
refer to the table on page one.
Step 7
Repeat steps 1 through 6 to install
the running board to the brackets on
the passenger side of the vehicle.
Congratulations on the installation of
your new ARIES AeroTread
™
running boards.
With the running boards installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on the
first page of this instruction manual.
