ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
2055117-INS-RA
•
PAGE 3
Step 4B - AdvantEDGE
™
Side Bars
Slide the bolts down the rail so that
two bolts are positioned for each bracket.
Carefully lift the side bar up and move the
bolts as necessary so they are in line with
the slots on the mounting brackets.
Secure the side bar to the brackets
using black M8 flat washers, lock
washers and hex nuts.
Snug the hardware,
but do not fully tighten.
Continue to step 6.
Step 5C - RidgeStep
™
Running Boards
Secure the C-shaped track mounting brackets
to the mounting brackets using black M8 hex
bolts, lock washers and flat washers.
Step 5A - RidgeStep
™
Running Boards
Slide the three C-shaped track
mounting brackets into the rail slots.
Step 5B - RidgeStep
™
Running Boards
Carefully place the running board
onto the mounting brackets.
Align the C-shaped track mounting brackets
with the mounting brackets on the vehicle.
