PAGE 1 • 2072101-INS-R
B
•
877.287.8634
• NEED ASSISTANCE?
•
ARIESAUTOMOTIVE.COM
Product Image
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product.
Do not use dish detergent, abrasive cleaners, abrasive pads,
wire brushes or other similar products that may damage the finish.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Moderate
Parts List
1
Winch support bracket
2
Nut plate
2
Hex bolt, M10 x 30mm
2
Flat washer, M10
2
Lock washer, M10
2
Hex bolt, M12 x 30mm
2
Flat washer, M12
2
Lock washer, M12
Tools Required
Ratchet
Torque wrench
Phillips
screwdriver
Flathead
screwdriver
10mm socket
Deburring tool
16mm socket
Touch-up paint
18mm socket
Masking tape
Cut-off tool
Scan
for helpful
install tips
INSTALLATION MANUAL
2072101
Torque Specifications
M
E
T
RIC
M6 bolt
3 ft.-lbs.
M8 bolt
7 ft.-lbs.
M10 bolt
25 ft.-lbs.
M12 bolt
45 ft.-lbs.
SA
E
1/4" bolt
3 ft.-lbs.
5/16" bolt
7 ft.-lbs.
3/8" bolt
16 ft.-lbs.
7/16" bolt
20 ft.-lbs.
1/2" bolt
28 ft.-lbs.
Use above torque setting
unless otherwise noted
