ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE? • 800.798.0813 • 2074142-INS-RA • PAGE 2
Step 1
Starting on the driver side,
locate the three mounting points
located underneath the vehicle.
Step 2
Locate the front mounting point.
With help, lift the rocker step up to
the vehicle and secure using two M8 flat
washers and two M8 nylock nuts.
Snug the hardware,
but do not fully tighten.
Step 3
Repeat step 2 to attach the middle
and rear mounting brackets.
With the rocker step in position,
tighten all mounting hardware to the
recommended torque specifications
listed in the table on the first page.
Step 4
Repeat steps 1 through 3
on the passenger side of the vehicle.
Congratulations on the installation
of your new ARIES rocker steps.
With the rocker steps installed,
periodic inspections should be
performed to ensure all mounting
hardware remains tight.
