ARIESAUTOMOTIVE.COM
•
PRODUCT SUPPORT: 877.287.8634
•
209045-INS-RA
•
11/11/2021
•
ECN8840
•
PAGE 1
Product Registration and Warranty
ARIES stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit:
warranty.curtgroup.com/surveys
INSTALLATION MANUAL
209045
Parts List
Qty Description
1
3" Sidebar, driver / left side
1
3" Sidebar, passenger / right side
2
Front mounting brackets
4
Center / rear mounting brackets
12
Hex bolts, 10mm x 30mm
12
Lock washers, 10mm
12
Flat washers,
10mm x 27mm OD x 3mm
12
Combo bolts, 8mm x 25mm
Maintenance
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
Brackets and Hardware
Front
Rear
(4) Center / Rear
Mounting Brackets
(2) Front
Mounting Brackets
NOTICE
Visit
www.ariesautomotive.com
for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed
to ensure all hardware and / or components remain secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Tools Required
Socket, 13mm
Ratchet
Socket, 17mm
Flathead screwdriver
Torque Specifications
M8 bolt
7 ft-lbs.
M10 bolt
16 ft-lbs.
Use above torque setting unless otherwise noted
