ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE? • 877.287.8634 • RC • PAGE 2
Step 1
Starting on the driver side,
remove the two factory hex bolts.
Step 2
Secure the driver-side mounting
bracket to the vehicle using the
previously removed hex bolts.
Snug the hardware,
but do not fully tighten.
Step 3
Repeat steps 1 and 2 to attach the
passenger-side mounting bracket.
Step 4
To attach the bull bar mounting brackets,
lay the bull bar on a flat surface.
Insert three M8 hex bolts
into the inner rail slot.
Place the driver-side bracket over
the bolts and secure the bracket to
the bull bar using an M8 flat washer and
M8 nylock nut.
Snug the hardware, but do not fully
tighten. Repeat this step for the
passenger-side bracket.
