ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
2152001-INS-R
B
•
PAGE 1
INSTALLATION MANUAL
Parts List
1
Bull bar
2
Driver / left mounting bracket
2
Passenger / right mounting bracket
1
Driver / left bull bar bracket
1
Passenger / right bull bar bracket
1
LED wiring harness*
4
Hex bolt, M8
4
Flat washer, M8
4
Nylock nut, M8
4
Hex bolt, M10
4
Flat washer, M10
4
Nylock nut, M10
2
Nylock nut, M12
2
Hex bolt, M12
2
Flat washer, M12
* Wiring harness only included
with LED-equipped models
Torque Specifications
M
et
ric
M6 bolt
3 ft-lbs.
M8 bolt
7 ft-lbs.
M10 bolt
16 ft-lbs.
M12 bolt
28 ft-lbs.
SA
E
1/4" bolt
3 ft-lbs.
5/16" bolt
7 ft-lbs.
3/8" bolt
16 ft-lbs.
7/16" bolt
20 ft-lbs.
1/2" bolt
28 ft-lbs.
Use above torque setting unless otherwise noted
Tools Required
Ratchet
Wrench, 13mm
Socket, 13mm
Wrench, 17mm
Socket, 17mm
Level
Socket Extension
Level of Difficulty
Easy
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Product Image
2162001
2162101
