ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
RA
•
PAGE 1
INSTALLATION MANUAL
Parts List
1
Bull bar
1
Driver / left mounting bracket
1
Passenger / right mounting bracket
4
Hex bolt, M8
4
Flat washer, M8
4
Nylock nut, M8
4
Bolt plate, M12
4
Flat washer, M12
4
Nylock nut, M12
1*
LED wiring harness*
* Wiring harness only included
with LED equipped models
Tools Required
Ratchet
Extension
Level
Wrench set
Socket set
--
Maintenance
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
2164003
2164103
Torque Specifications
M8 bolt
7 ft-lbs.
M12 bolt
28 ft-lbs.
Use above torque setting unless otherwise noted
Level of Difficulty
Moderate
NOTICE
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
Product Registration and Warranty
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
