ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
4524-INS-RA
•
PAGE 2
Step 1
Starting on the driver side, locate the
three mounting tabs along the bottom
edge of the vehicle body.
Step 4
Carefully place the side bar onto
the brackets with the larger step pad
towards the front of the vehicle.
Step 2
Starting at the front mounting location,
remove any debris from the factory studs.
Secure a mounting bracket using an M8 flat
washer, lock washer and hex nut.
Note:
Apply anti-seize to the studs to keep the
nuts from seizing up. Repeat this process for
the middle and rear mounting locations.
Snug the hardware,
but do not fully tighten.
Step 3
Repeat step 2 for the front, middle and rear
mounting locations on the passenger side.
