ARIESAUTOMOTIVE.COM
•
PRODUCT SUPPORT: 877.287.8634
•
S223046-2-INS-RA
•
04/17/2020
•
ECN6919
•
PAGE 1
Product Registration and Warranty
ARIES stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit:
warranty.curtgroup.com/surveys
INSTALLATION MANUAL
S223046-2
Parts List
Qty Description
1
Driver / left side bar
1
Passenger / right side bar
2
Mounting bracket, front
4
Mounting bracket, universal
12
Hex bolt, M10 x 30mm
12
Flat washer, M10,
small outer diameter
24
Lock washer, M10
12
Hex bolt, M10 x 25mm
12
Flat washer, M10,
large outer diameter
Tools Required
Ratchet
Level
Socket, 16mm
--
Maintenance
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
Front
Rear
Torque Specifications*
M
et
ric
M6 bolt
3 ft-lbs.
M8 bolt
7 ft-lbs.
M10 bolt
16 ft-lbs.
M12 bolt
28 ft-lbs.
SA
E
1/4" bolt
3 ft-lbs.
5/16" bolt
7 ft-lbs.
3/8" bolt
16 ft-lbs.
7/16" bolt
20 ft-lbs.
1/2" bolt
28 ft-lbs.
* Above specifications are general guidelines.
If purchasing hardware use the torque
specifications provided with that hardware.
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
NOTICE
Visit
www.ariesautomotive.com
for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed
to ensure all hardware and / or components remain secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
