EN
s 10 s
TROUBLESHOOTING
Thermal cutout switch
The vacuum cleaner is equipped with a thermal cutout switch to protect it in the event that the moss
tor overheats. If the vacuum cleaner suddenly switches off by itself, proceed as follows:
s Switch off the vacuum cleaner and unplug it from the mains power.
s Look for the origin of the overheating (blocked suction pipe, dirty filter, etc.)
s Clean the pipe, empty the dust bag, and clean the filter, if necessary.
s Wait for about 30s40 minutes to allow the motor to cool down.
s After 30s40 minutes, insert the plug in the mains socket and switch on the vacuum cleaner.
The vacuum cleaner should now work.
s If the vacuum cleaner still does not work, wait another 20 minutes and then try again.
s If the cleaner still does not work, contact an Assistance Centre.