Figure 6: Bracket Mount Examples for Four-Post Rack Mount
Figure 7: Improper Bracket Mount Example for Four-Post Rack Mount
displays an improper bracket mount configuration example.
Figure 6: Bracket Mount Examples for Four-Post Rack Mount
Figure 7: Improper Bracket Mount Example for Four-Post Rack Mount
1
Bracket not attached by at
least 5 pins
3.2.1
Attaching Mounting Brackets to the Chassis (Four-post)
The following figure displays the front bracket alignment for mounting the switch into a four-post rack.
Figure 8: Attaching the Bracket to the Four-post Switch
1
Attaching brackets for front
mount
This procedure attaches mounting brackets to the switch chassis as depicted in above figure.
1. Align the mounting brackets with the attachment pins to obtain the desired mounting position.
2. Place the bracket flush on the chassis with attachment pins protruding through key-openings.
3. Slide the bracket toward the front flange until the bracket clip locks with an audible click.
12
