Quick Start Guide: 7368x Series Modular Data Center Switches
33
Appendix F
Maintenance and Field Replacement
Note
Follow ESD protection protocols while handling components of the switch during maintenance
operations.
F.1
Switch Card Module
The switch card module is accessible from the rear of the switch as shown in
. Refer to
for more details on the removal and replacement of the switch card module.
Figure F-1: Switch Card Module Maintenance
The module includes lock-levers that secure it to the chassis. The module and the lock levers are easily
damaged by improperly removing, inserting, or handling. Use caution while lifting or moving the module
after it is removed from the chassis.
F.1.1
Removing Switch Card Module
Follow the steps listed below to remove the switch card module from the switch chassis.
Step 1
Ground yourself with an ESD wrist strap.
Step 2
Move the release handle down.
Step 3
Pinch the release levers towards the center to unlock the module from the chassis.
Step 4
Carefully, remove the switch card module from the chassis while supporting it through the
process.
1
Switch Card Release Handle
2
Switch Card Release Lever
Summary of Contents for 7368X Series
Page 32: ...28 Quick Start Guide 7368x Series Modular Data Center Switches Appendix C Front Panels ...
Page 34: ...30 Quick Start Guide 7368x Series Modular Data Center Switches Appendix D Rear Panels ...
Page 36: ...32 Quick Start Guide 7368x Series Modular Data Center Switches Appendix E Line Cards ...
