15
Mounting the ARD-1007TX HDMI Extender
It is very important to place the unit in a suitable environment. Make sure the
area is well ventilated, out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
1. Wall mounting
There are two methods available to install the ARD-1007TX HDMI digital extender: Wall
mounting and DIN-rail mounting.
1. Wall mounting
The extender can be placed on a shelf, table, or mounted onto a wall or board. To mount
them onto a wall or board, you will require the mounting screws found in the accessory box.
Please follow the steps shown in the diagram below:
Step1.
Situate the ARD-1007TX HDMI digital extender on a board or a wall. Firmly secure
it by screwing it in with the four “#8-32UNC” sized screws.
Step2.
Make sure that the ARD-1007TX HDMI extender is correctly and securely seated
onto the board or wall.
Wall or board
Screws
