23
I
4. Pedestal Mounting
The ADM-5821AX display can be mounted on the pedestal. In general, the pedestal comes
with a removable shaft or bracket, which allows the display to be easily removed and
operated depending on user’s needs.
As shown in the figure below, please follow these steps to mount the display.
Step 1:
Place the metal mounting plate on the back of the ADM-5821AX industrial display,
and align holes on the mounting plate with holes on the display.
Step 2:
Use a screwdriver to tighten the six “
#8-32UNC
” sized screws to fix the metal
mounting plate on the display.
Step 3:
Take the pedestal and fit it on a firmly fixed shaft or bracket through the shaft or
screw hole.Mount the display onto the pedestal through the mounting plate.
Step 4:
Make sure the ADM-5821AX display is securely and correctly seated onto the
pedestal.
Shaft hole
Screw hole
Shaft
Pedestal
Mounting plate
