Note:
The product is designed for specific application and must be professionally installed by qualified
personnel who has RF and related knowledge.
Getting the O-235 Online
Step 1: Power up
Plug one end of the Ethernet cable into the PoE+ switch or injector and plug the other end into the LAN1
(PoE+) on the O-235. Make sure the PoE+ source you are using is turned ON.
Step 2: Connect to the network
As you are using PoE+, the O-235 should already be connected to your network.
Mount the AP to the bracket.
Tighten the thumb screw using
Philips 2 screw driver.
4
5
Philips #2
Screw driver
