31
Chapter 4 BIOS Setup
Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your system. The UEFI chip on
the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY when you
start up the computer. Please press <F2> or <Del> during the Power-On-Self-Test (POST) to enter the UEFI
SETUP UTILITY, otherawise, POST will continue with its test routines.
If you wish to enter the UEFI SETUP UTILITY after POST, restart the sys¬tem by pressing <Ctl> + <Alt>
+ <Delete>, or by pressing the reset button on the system chassis. You may also restart by turning the system
off and then back on.
Because the UEFI software is constantly being updated, the
following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.
UEFI Menu Bar
The top of the screen has a menu bar with the following selections:
Main
For setting system time/date information
Advanced
For advanced system configurations
H/W Monitor
Displays current hardware status
Boot
For configuring boot settings and boot priority
Security
For security settings
Exit
Exit the current screen or the UEFI Setup Utility
