background image

AN1808-12S

 

4G

 Audio Intercom (E2.2) 

 9/16 

Using the 

AN1808-12S

 

1. Setting your call out numbers

1.1

 

Send the text SMS to the number of device. 

1.2

 

The format of text SMS is

*12*1234#11[call out number 1]#12[call out number 2]#13[call out number 3]#

1.3

 

When the setting is finished, the sender will receive the reply as below.

  

11[call out number 1]#12[call out number 2]#13[call out number 3]#OK

 

1.4

 

If you press the call button of device, it will call the numbers in sequence.   

2. Setting your dial in numbers ( Guest list )

2.1

 

Send the text SMS to the number of device. 

2.2

 

The format of text SMS is

*12*1234#71[country code]#72[relay][call in number 1]# 72[relay][call in number 2]#...

2.3

 

When the setting is finished, the sender will receive the reply as below.

   

71[country code]#72[relay][call in number 1]# 72[relay][call in number 2]#...OK

 

2.4

 

If a guest calls the number of the device, it will trigger the relay to control the door 

latch.   

2.5

 

If the number is not on the guest list, the device will answer and sound a beep. Then 

the administrator can enter the programming mode by password. 

4

. App on iOS and Android

3.1

 

Please search 

4G

 intercom 

on Apple store or Google Play 

3.2

 

The App can help you to program the device more easily.  

3.3

 

You can use the App to unlock the door via calling or SMS. 

3. Setting your PIN numbers

3.1

 

The format of text SMS is

*12*1234#895[X]#87[relay][pin code 1]# 87[relay][pin code 2]#87[relay][pin code 3]#...

3.2

 

When the setting is finished, the sender will receive the reply as below.

 

895[X]#87[relay][pin code 1]# 87[relay][pin code 2]#87[relay][pin code 3]#...OK

 

3.3

 

If you press the correct PIN code then the device will trigger the relay to open.   

Summary of Contents for AN1808-12S

















Reviews: