Revised by R. Robinson
Issue AV1.13 8 June 2006
56
Examples.
01
02
This station has access to SPD block 01 for method1
and
SPD
block
02
for
method
2
01
09
This station has access to SPD block 01 for method 1
and
SPD
block
09
for
method
2
00
07
This station does not have a SPD block for method 1
but has SPD block 07 for method 2
06
00
This station has access to SPD block 06 for method 1
but does not have a SPD block for method 2
Related Zones.
,
Zone 510
to
Zone 599 Reserved
Zone 600 FLX
(CO = Line #)
DAYTIME
Default value = 11 12 13 14 15
Range =
N/A
Assigns stations so that they will ring to incoming CO line calls for the daytime period. Stations assigned here
can answer the incoming calls by going Off-Hook. 4 ring methods are available in
1)
Common Audio: All assigned stations will ring together.
2)
Linear: The incoming line will always try to ring the first assigned station. If it is busy it will go to the
second assigned station; if it is busy it will go to the next ext, etc. until it finds a free ext and rings it.
3)
Circular: The first incoming call will ring to the first assigned station, the second call will ring to the
second assigned station, etc. If the station is busy it will ring to the next available assigned station.
4)
Hunt: This is similar to linear with a major difference. If an assigned station is free but does not
answer, the system will ring both that station and the next assigned station after the time in
has been reached. If both do not answer in the next period
) it will also ring the third
assigned station. This process continues until the call is terminated. If an ext is to ring and is busy, it
can be programmed to receive BRT once only. See
.
**AV256 ONLY**
If the Voice Service Card is used for a DISA line, the Voice Channel number must be assigned here. For
AV16/24 see
Related Zones.
,
,
,
Zone 601 FLX
(CO = Line # )
NIGHTTIME
Default value = 11 12 13 14 15
Range =
N/A
This zone has a similar function as
, but this zone is for nighttime allocation not daytime as in
,
,
,
Zone 602
Door (Door = Which Door Phone)
Default value =
11 12 13 14 15
Range =
N/A
The stations assigned here will ring when either the Door Phone or Door Sensor is activated. During the
ringing period the Door LED will flash. Setting
to 000 will disable the Door Sensor ringing.
Related Zones.
,
,
,
,
Zone 603
CO GRP
(Group = 1 of 8 groups)
Default value =
01 02 03 04 05
Range =
N/A
This zone allocates the CO line to an outgoing access group. These groups can be accessed by a station
dialing 9/0 (
), by Speed Dial or by pressing the DSS button for the line.
allocates the stations to the groups. See also
for auto-CO selection by LCR
Groups 5 ~ 8 can also be used for special selection purposes:-
If a Keyphone or SLT presses
*5 (off-hook) they will get a CO from group 5
*6
(off-hook)
for
group
6
etc.
