ARISTEL NETWORKS
PTY. LTD
Operating manual Ver. 1.1
Issued September 2006
page 7
Programming Options.
Appointed Mode (995#)
The CTM3000 will ring to an incoming call from the PSTN or GSM and
provide an answer tone (tone A) for one second.
The CTM3000 will dial the pre-programmed destination number after a pause
of 1.5 seconds.
Random Mode (996)
The CTM3000 will ring to an incoming call from the PSTN or GSM and
provide an answer tone (tone B) for one second.
The CTM3000 will then wait for the caller to enter the “random password”
and the destination number. The caller has 20 seconds to enter the digits.
PROGRAMMING INSTRUCTIONS AND DETAILS
Entering Programming Mode
1.
Lift off the handset of the telephone connected to the “phone” jack.
2.
You will hear dial tone. Go to step 5
3.
Call the CTM3000. (either PSTN or GSM)
4.
CTM will answer and provide an answering tone (A or B)
5.
Enter the programming password (default = *1234)
a)
If the password is correct, a programming tone (tone C) will be
heard for 2 seconds. You are now in programming mode
b)
If the password is incorrect, the call will be disconnected.
6.
You can now program any of the features as listed
a)
If programming of a feature is successful, a confirmation tone (1
burst of 05. sec on and 0.5 sec off) will be heard. You can continue
to program
b)
If the programming of a feature fails, a rejection tone (3 bursts of
05. sec on and 0.5 sec off) will be heard. You can then re-enter the
data and continue to program.
c)
If you do not enter any data for 6 seconds, the CTM3000 will exit
from programming mode.
d)
To exit programming mode, either do not enter any data for 6
seconds, or just hang-up the telephone
Passwords
NOTE! If the random password is the same as the programming password,
random mode will not be available.
Programming Password
Press 0 xxxx# where xxxx can be any 4 digit number from 0000 to
9999
Random Password
Press 1 xxxx# where xxxx can be any 4 digit number from 0000 to
9999
Operating Modes
Appointed Mode
Press 995# to select appointed mode
Random Mode
Press 996# to select random mode
