station number, wait for answer, then press
trf/fl
and
replace handset.
Conference Calls
Lift handset, dial Party A, place Party A on hold, Dial Party B.
When answered, press
conf
.
Note: Not applicable to DV-22 system.
Do Not Disturb
Press
dnd
to enable or disable.
Note:
dnd
LED will flash when Do Not Disturb is enabled.
Door Phone
Call Door Phone:
(1) Press
spk
+
#
+
6
+
1
(for Door Phone 1) or
spk
+
#
+
6
+
2
(for Door Phone 2).
(2) Press
door
button on DSS panel to talk to Door
1.
Door Lock Release: When on door Phone call,
press
0
to release Door Lock.
Note: When
door
button remains ON, it means the door was not
closed.
Force Account Code(s)
Press
fac
button or
func
+
1
, then on entry of account
number, system will automatically access a free CO line.
Hold Call
Normal Call Hold: Lift handset and answer call, press
hold
button and replace handset. To retrieve the
CO line on hold, press
hold
or the DSS button oh
hold.
Exclusive Call Hold: Lift handset and answer call, press
hold
button twice and replace handset. To retrieve the
CO line on hold, press
hold
or the DSS button oh hold.
Individual Alarm / Morning Call
On Console Stations: Press
func
+
9
+
9
, and HH :
MM 01 +
save
.
On Common Stations: Press
func
+
9
, and HH : MM
01 +
save
.
To cancel Individual alarm: Set HH : MM 01 = 00 : 00 01
Intercom Call
Normal Call: Lift handset or
spk
, dial station number
or
DSS
button.
Call Operator: Lift handset or
spk
, dial
0
or
9
to call
operator.
Lock / Unlock Your Telephone
1. Lock/Unlock: Press
func
+
3
, key in security
number (for programming function Zone 248). When
programmed, press
save
.
2. Temporary Unlock: Press
func
+
4
, key in security
number. This will provide CO access for one call.
Message Lamp ON
Call an internal station which is engaged or not answer,
press DSS button assigned for
mw
button. Once the called
station presses the
mw
button and recall to the station
which leaves the message, these 2 stations can talk each
other.
Night Lamp Function
Press
spk
+
#
+
8670
+
spk
to enable or disable Lamp
indicator on handset.
Outgoing Call
1. Off Hook: Lift handset, press
0
or
9
(depending on
programming) and dial required telephone number.
2. On Hook: Press
0
or
9
; or press
spk
+
0
or
9
and
dial required telephone number.
3. CO Access through DSS: Handset on/off hook.
Press any defined CO DSS button, and dial
required telephone number.
4. Press
#
+
Line Representative Codes
, and dial
required telephone number.
Outgoing Calls Search
Off Hook and press
OUT
and
6
/
▲ to scroll forward or
3
/
▼ to scroll backwards. Press
redial
to make this number
call. Press
4
to delete this number.
Paging
General Paging: Lift handset, press
#
+
Paging Code
.
Paging Codes:
0 = all Internal and External Zone Paging.
1 = All Internal Zone Paging.
2 = 2 + Internal Zone 1 ~ 8
3 = 3 + External Zone 1 ~ 8
9 = All External Zone Paging
Quick Paging: Lift handset, and press
page
on handset
Pick Up
1. All Groups: Lift h
*
+
0
or press
pick up
.
2. Own Group: Lift h
*
+
1
or press
pick up
.
3. Defined Groups: Lift h
*
+
2
+ Group Code.
4. Defined Station: Lift handset +
*
+
3
+ Defined
Station.
5. Defined CO Lines: Lift handset +
*
+
4
+
Line
Representative Codes
.
Smart Phone
