Frequently used parameter
1. Press
PROG
+
1
~
8
Key to enter Programming and use
▼
or
▲
Key to adjust or enter value. Press
PROG
to save
setting and move to next item
2. While programming, Press
SPK
Key to exit Programming
or do not save setting.
z
Volume adjustment
Speaker volume adjustment
Press
SPK
Key to use handsfree, Press
▼
or
▲
Key to
adjust Speaker volume to the desired level.
(There are 4 different volume levels. Default: 1)
Handset volume adjustment
Pick up handset, Press
▼
or
▲
Key to adjust handset
volume to the desired level.
(There are 4 different volume levels. Default: 1)
Ring tone volume adjustment
While the phone was rung, press
▼
or
▲
Key to adjust
Ring tone volume to the desired level.
(There are 4 different volume levels. Default: 2)
z
Date and Time Setting
Enter Programming, the year digits blink……
Press
▼
or
▲
Key to adjust, Press
PROG
Key to save
setting and move to the next item. Press
SPK
Key to exit
programming or do not save setting.
The sequence of setting is year, month, day, hour and
minute.
z
LCD Brightness Adjustment
LCD Displays “2 LCd-2”
Press
▼
or
▲
Key to adjust LCD brightness to the desired
level.
(There are 4 different brightness levels. Default: 3)
z
Local Area Code Setting
LCD Displays “3 LOCAL_ _ _ _ _”
Input the local area code, and the telephone will delete local
area code on LCD with every incoming call.
z
Recall/Flash Key Time Setting
LCD displays “5 FLASH _ _ _ ”,
input 005-090, Unit: 10ms
Default
：
036*10ms =360ms
z
Auto Exchange Line Access Code Setting
LCD displays “6 COdE1 _ _ _”, input the first group of
exchange access code, press
▼
/
▲
to save and enter
the second group.
LCD displays “6 COdE2_ _ _”, input the second group of
exchange access code. Press
REDIAL
to enter a standing
for status of any number.
Once the code is set, the telephone will dial the access
code automatically and pause one second before dialing
out the telephone number when using the Auto call-back
and redial operation.
If the phone is connected directly to the exchange line,
CANCEL
the exchange access code.
z
Headset Enable/Unable Setting
LCD displays “7 HEADSET _ _ _”, Enter the value: 11 to
activate the Headset function.
LCD displays “7 HEADSET _ _ _”, Enter the value: 00 to
disable the Headset function
.
z
Tone Pulse Setting
LCD displays “8 PULSE-0”, Enter the value: 1-pulse, 0-tone
Default
：
0
z
Smart Code Setting
On hook, press
PROG
+
SMART
key. LCD displays
“S_Art-”, Enter the access code number. This function will
enable the station to operate the defined function by press
“Smart” key.
Default: * + 1. (as “pick up” function at
Aristel
Key Phone
Systems)
Telephone Basic Function Operation
z
DSS key M1~M20 Programming and calling out.
Programming: On hook, press
PROG
+
M1
~
M20
Key and
enter telephone number and then press
PROG
key to
save or press
SPK
to exit.
Calling out: On hook, press any key of
M1~M20
z
Incoming Numbers Search
On hook, press
▲
Key to activate incoming numbers search.
Press
▼
or
▲
again to search the numbers and its date and
time backwardly. Press
REDIAL
Key to dial this current
number.
Press
HOLD/DEL
Key to delete the current record, or hold
HOLD/DEL
for three seconds to delete all incoming records.
z
Outgoing Numbers Search
On hook, press
▼
Key to activate outgoing numbers search.
Press
▼
or
▲
again to search the numbers and its date and
time backwardly. Press
REDIAL
Key to dial this current
number.
Press
HOLD/DEL
Key to delete the current record, or hold
HOLD/DEL
for three seconds to delete all outgoing records.
