1 - 2 System Specification
Model
SC425 / SC1000
Input
Voltage
240 VAC (+25% / -25%)
Frequency 50Hz
Output
Voltage Regulation
Automatically adjusts the Output Voltage to within 10% of the
Nominal Input Voltage.
Voltage
240VAC (+5% / -5%)
Frequency
50Hz (+0.5% / -0.5%
Transfer Time
4mS (Typical)
Socket
Type
Australian 3 Pin x 4 Outlets
Battery
Type
Sealed Lead Acid - Maintenance Free
Voltage 12VDC
Recharge Time
4 Hours (to 90% of Full Capacity)
Protection Self-diagnostics
upon
power-up
Protection
Spike
80 joules, over 2mS (220VAC)
Unit Input
Fuses for overload and short circuit protection
Switch Function
UPS automatic switch for mains power and battery
Overload
UPS automatic shutdown if overload over 110% of nominal
for 60 seconds and 130% for 5 seconds
Short Circuit
UPS output cut-off immediately and input fuse protection
Alarms
Battery Back-up
Slow beeping sound (4S intervals) - see alarm reset function
Battery Low
Rapid beeping sound (1S intervals)
Overload
Continuous beeping sound
Equipment Telephone/Fax
RJ11
(SC1000)
PC Interface
USB (SC1000)
Environment Altitude
<5000M
Temperature
0ºC - 50ºC
Humidity
0% - 90% (non condensing)
Audible Noise
<40dB (1M from surface)
Standards
Noise Suppression
Meets CE (EN50091), FCC Class B
Surge Suppression
Meets IEEE587
Emergency
Light
LED/Blue Light
AC input power failure, emergency power light will turn on
(SC1000)
Dimensions DxWxH
(mm)
275x110x202
Weight
Net (Kg)
5.9 / 6.4
