1 - 4 System Description
1.
Microprocessor
controlled
2.
Auto Voltage Regulation
3.
Smart Communication Port – USB Port (SC1000)
4.
Fax/Phone
line
surge
suppression (SC1000)
5.
50/60Hz auto detecting
6.
Cold start function (DC power on)
7.
Short circuit and overload protection
8.
Automatic diagnostics & battery check while power on (SC1000)
9.
Attractive smart color combination
11. Vertical and horizontal Installation
2. INSTALLATION AND OPERATION
2 - 1. Installation
The following steps explain how to install the UPS to your equipment.
Step 1. Assure AC power input and output voltages are within the UPS
ranges specified on the rear panel of the device.
Step 2. Plug the UPS input power cord into a wall outlet or other
power source.
Step 3. Plug the “equipment” power lead into the UPS output.
Step 4. Start the UPS by pressing the ON/OFF button for about
4 seconds. The beeps and it conducts a quick self-test
Before it enters Normal AC power mode. The AC power green
LED indicator illuminates indicating that power is now available
from the UPS rear power outlets.
Before turning off the UPS, please turn off any equipment attached to it.
Step 5. To turn off the UPS, press the ON/OFF button for about 6 seconds.
The unit will switch to battery operation before turning off completely.
