SLT70 OPERATION MANUAL
Aristel
Aristel
, the Best
in Telecommunications
12
4.4.10 Dialing Delay Time Setting
Setting Status —16+ cfm Key + CO-dialing Delay Time (0~199) + cfm Key
Note: Some KTSs need a delay time of on-hook signal detection, then start to receive
dialing digits.
Default under General Mode: 016 (16*30ms=480ms, unit: 30ms)
Default under
Aristel
KTS Mode: 004 (4*30ms=120ms, unit: 30ms)
4.4.11 Hook Delay Time Adjustment
Setting Status — 17+ cfm Key + Hook Delay Time (0~199) + cfm Key
Default under General Mode: 010 (10*30ms=300ms, unit: 30ms)
Default under
Aristel
KTS Mode: 030 (30*30ms=900ms, unit: 30ms)
4.4.12 ARS/LCR Start-using or not
Setting Status — 18+ cfm Key + “0” or”1” +
cfm Key
(0: do not use, 1: use)
Default: 0
4.4.13 Tone/Pulse dialing Switch
Setting Status — 13+ cfm Key + “0” or”1” +
cfm Key
(0: Tone, 1: Pulse)
Default:: 0
Note: If above set as “1” (Pulse), you may press
*
Key to change to Tone-dialing mode
while on hook. After going off hook, the telephone will automatically return to
Pulse-dialing mode.
