11
Mounting on the Windshield
1. Assemble the bracket and the arm stand.
2. Clean the windshield where you will apply the suction cup. Then, attach the
suction cup firmly to the windshield and press the locking tab to secure the
cup.
3. Carefully fit your PND into the b
CAUTION:
After the suction cup is secured to the windshield, never try to pull or
wriggle the arm. Always adjust the arm of the car holder for the best
viewing angle BEFORE driving. Avoid adjusting the device with one hand
while driving.
Using the Car Holder
The car holder consists of a bracket and a stand. Use the car holder to fix your
device in a vehicle. Make sure that the GPS antenna has a clear view of the
sky.
For initial positioning, remain at the same spot with a clear view of
The GPS may take a few minutes to find its current location initially.
CAUTION:
♦
Select an appropriate location for the car holder. Never place the holder
where the driver’s field of vision is blocked.
♦
If the car’s windshield is tinted with a re
antenna (optional) may be needed to route the antenna to the top of the
car through a window. When closing the car window, be careful not to
pinch the antenna cable. (Cars with an anti
automatically leave adequate space as needed.)
ARISTO VOYAGER X500 User’s Manual
www.aristo.pl
the Windshield
Assemble the bracket and the arm stand.
Clean the windshield where you will apply the suction cup. Then, attach the
suction cup firmly to the windshield and press the locking tab to secure the
Carefully fit your PND into the bracket.
After the suction cup is secured to the windshield, never try to pull or
wriggle the arm. Always adjust the arm of the car holder for the best
viewing angle BEFORE driving. Avoid adjusting the device with one hand
The car holder consists of a bracket and a stand. Use the car holder to fix your
device in a vehicle. Make sure that the GPS antenna has a clear view of the
For initial positioning, remain at the same spot with a clear view of
The GPS may take a few minutes to find its current location initially.
Select an appropriate location for the car holder. Never place the holder
where the driver’s field of vision is blocked.
If the car’s windshield is tinted with a reflective coating, an external
antenna (optional) may be needed to route the antenna to the top of the
car through a window. When closing the car window, be careful not to
pinch the antenna cable. (Cars with an anti-jam window design may
adequate space as needed.)
ARISTO VOYAGER X500 User’s Manual
www.aristo.pl
Clean the windshield where you will apply the suction cup. Then, attach the
suction cup firmly to the windshield and press the locking tab to secure the
After the suction cup is secured to the windshield, never try to pull or
wriggle the arm. Always adjust the arm of the car holder for the best
viewing angle BEFORE driving. Avoid adjusting the device with one hand
The car holder consists of a bracket and a stand. Use the car holder to fix your
device in a vehicle. Make sure that the GPS antenna has a clear view of the
For initial positioning, remain at the same spot with a clear view of the sky.
The GPS may take a few minutes to find its current location initially.
Select an appropriate location for the car holder. Never place the holder
flective coating, an external
antenna (optional) may be needed to route the antenna to the top of the
car through a window. When closing the car window, be careful not to
jam window design may
