Ariston 9351116000134, Installation Instructions Manual

6

To install the appliance please respect the follow 
instructions:
•  The appliance must be installed by qualified 

technicians. 
In order to avoid damage to the electronic parts 
of the appliance, please do not use additional 
screws.

•  Essential precautions to respect before installing 

the appliance are the following:  
To have made a cutout on the bottom of the 
cabinet which is suitable to hold the appliance in 
position (fig. 2): 

AGITBG 520

 - (W) 502 x (D) 265mm 

AGITBG 850 

- (W) 835 x (D) 265mm 

AGITBG INSTALLATION

Before installing the appliance, make sure that 
none of the parts are damaged in any way. In 
case of damaged parts, contact your retailer 
and do not proceed with installation. Read all 
of the following instructions with care before 
installing the appliance. 

•  Use ducting within the min/max specifications
•  Limit the number of ducting bends.
•  Do not make any changes in ducting diameter 

(recommended constant diameter: Ø 150 mm  
or equal surface area).

Before installing the appliance - in order not to 
damage the appliance itself - the metal grease filter 
should be removed. These filters could be removed 
by pushing the handles towards the back side of the 
rangehood and pulling it downwards to unfasten it 
from its slot. (Fig.1).

NOTE

(Fig.1)

(Fig.2)

1.  Prepare the power supply - 240 volts.
2.  Prepare a hole for the exhaust - 160mm diameter.
•  Do not use screws to fix the ducting to the 

rangehoods as they will prevent the movement of 
non-return valves.

•  Limit the number of elbows in the ducting, since 

each elbow reduces the duct efficiency by 1 
metre. (i.e. if you use two 90° elbows, the length 
of ducting must not exceed 5 metres.)

•  Avoid abrupt direction changes.
•  Use 150mm constant diameter ducting for the 

whole length.

WARNING: Failure to install the screws or fixing 
device in accordance with these instructions 
may result in electrical hazards.