16
PRODUCT DESCRIPTION
Shower ON/OFF
See Figure 6.
Press the Shower ON/OFF button to activate the
shower.
Turn off by pushing the Shower ON/OFF button
again.
The shower water temperature is adjusted by turning
the Water temperature setting knob.
Temperature display
See Figure 7.
There are two temperature displays.
• The top display (A) indicates the water
temperature in the Classic Line 2 bathtub.
• The lower display (B) indicates the water
WHPSHUDWXUHRIWKH&ODVVLF/LQHEDWKWXE¿OOLQJRU
the shower.
Scalding protection
See Figure 7.
Classic Line 2 bathtub is equipped with an electronic
scalding protection, that automatically shuts off the
water if a dangerous temperature level is detected,
above or equal to 45 °C. The water shuts off earlier if
there is a higher incoming water temperature. When
triggered the LED indicator (C) between the displays
ÀDVKHV\HOORZWKHWHPSHUDWXUHGLVSOD\ÀDVKHVDQGD
beeping is heard.
NOTE
Make sure the shower handle is placed in the
holder facing the bottom of the bathtub to
prevent water from spraying outside of the
EDWKWXELQDXWRÀXVKPRGH
Figure 6
Figure 7
37.0°C
37.0°C
A
B
C