17
PRODUCT
DESCRIPTION
Scalding protection not working
See Figure 8.
If Scalding protection does not work no temperature
is shown on the display. Contact an Arjo service
technician.
Air Spa system (optional)
See Figure 9.
Classic Line 2 bathtub with Air Spa system provides
a gentle massaging effect which is intended to
support relaxation as well as give a pleasant sensory
experience.
The massage effect is obtained by injecting air
through air jets into the Classic Line 2 bathtub water.
The Air Spa system has two intensity settings.
How to use the Air Spa system (3 steps)
See Figure 9.
1. Press the Air Spa system ON/intensity/OFF
button on the control panel and the air blower
starts at minimum intensity.
2. Push the button again to increase to maximum
intensity.
3. Push the button again to stop.
Air Spa System turns off automatically after
30 minutes.
NOTE
The recommended maximum treatment with
the Air Spa system is 15 minutes.
NOTE
Operating the Air Spa system with soapy
water can cause excessive foaming.
Figure 9
Figure 8
--.-°C
--.-°C