30
BATHE PATIENT USING A BATH LIFT TROLLEY
Figure 39
Figure 40
Figure 41
Bathe patient using a bath lift trolley
Transfer and bathe patient
(14 steps)
Miranti and Bolero are the recommended Arjo
bath lift trolleys that can be used with Classic Line 2
bathtub. See Miranti or Bolero IFU before use.
1. Before using Classic Line 2 bathtub perform the
preparations described in section Preparations
for bath on page 23.
2. Remove the footrest.
3. Undress the patient and cover him or her with
towels to keep warm.
4. Position the bath lift trolley to the side of Classic
Line 2 bathtub.
5. Raise the bath lift trolley up in order to clear the
edge of Classic Line 2 bathtub. See Figure 39.
6. Move the bath lift trolley with patient in over
Classic Line 2 bathtub. See Figure 40.
7. Move the bath lift trolley over Classic Line 2
bathtub until it comes to a stop against Classic
Line 2 bathtub. See Figure 41.
8. Make sure the bath lift trolley is centered over
Classic Line 2 bathtub.
