31
BATHE PATIENT USING A BATH LIFT TROLLEY
9. Adjust the bath lift trolley to an ergonomic working
height. See Figure 42.
10. Raise Classic Line 2 bathtub so that the bath lift
trolley is touching the bottom of Classic Line 2
bathtub. See Figure 43.
11. Lower the back rest to a comfortable position for
the patient.
12. Attach the footrest if needed.
13. Bathe the patient.
14. Use the Air Spa System, if applicable. See Air
Spa system (optional) on page 17.
Shower patient
(13 steps)
1. After bathing, open the Drainage plug and let the
water out.
2. Raise the back rest and let the patient put his or
her hands on the security grip.
3. Remove the Footrest if needed.
4. To separate the bath lift trolley from the bottom
of Classic Line 2 bathtub, lower Classic Line 2
bathtub to its lowest position or raise the bath lift
trolley. See Figure 44.
Figure 42
Figure 43
Figure 44
Continue with the steps on next page
