35
CLEANING AND DISINFECTION
35
CLEANING AND DISINFECTION
Microbiological formation prevention
In order to enhance the on-site curative actions (chlorine or thermal shock), which do not guarantee a
reduction of the contamination long term, make sure to follow the instructions below.
Installation precautions
,QRUGHUWROLPLWWKHJURZWKRIEDFWHULDOÀRUDLWLVQHFHVVDU\WRWDNHDFWLRQDWIRXUOHYHOV
• Avoid stagnating water and make sure proper water circulation;
• Take precautions against the formation of scale and corrosion based on the water quality;
• Maintain a high water temperature all the way from the hot water dispenser to the different
distribution pipes.
• Mix hot and cold water as close as possible to the point of use.
Use
•
/HWWKHZDWHUÀRZDSSUR[LPDWHO\PLQXWHVEHIRUHWKH¿UVWEDWKRIWKHGD\
•
&OHDQDQGGLVLQIHFW&ODVVLF/LQHEDWKWXEDFFRUGLQJWRWKH,)8EHIRUHWKH¿UVWEDWKRIWKHGD\DQG
after the bath of each patient.
• For scheduled maintenance see Care and preventive maintenance on page 46.
Do not forget to contact Arjo for the annual Preventive Maintenance visit.