40
CLEANING AND DISINFECTION
Figure 64
Figure 65
22. Wipe all other contact areas outside of Classic
Line 2 bathtub (particularly behind the head) and
on knobs, with the cloth.
23. Allow
an appropriate contact time
of the
disinfectant according to the disinfectant
manufacturers IFU.
24. Open the Drainage plug.
25. Rinse all parts clean with the shower. Use plenty
of water having a temperature of approximately
25 °C (77 °F) using the shower handle to rinse off
the disinfectant. See Figure 64.
26. Wet a clean cloth with water and remove all
WUDFHVRIGLVLQIHFWDQWÀXLGRQFRQWDFWDUHDV
outside Classic Line 2 bathtub, such as handle
and knobs. Rinse the cloth occasionally in
running water when removing disinfectant.
27. Place the shower handle in the holder.
See Figure 65.
28. Leave to air dry.
29. Attach the footrest.
NOTE
Make sure the shower handle is placed
in the holder facing the bottom of the
bathtub to prevent water from spraying on
WKHÀRRULQDXWRÀXVKPRGH