background image

001.10610.EN rev

. 13

Foreword

1

Thank you for choosing Arjo 

products.

Your EASYTRACK

®

 is part of a series of quality 

products designed specially for home care, 

nursing homes and other health care uses.
We are dedicated to serving your needs and 

providing the best products available along with 

training that will bring your staff maximum 

benefit from every Arjo product.

Please Read this Manual Thoroughly!

The information in this manual is crucial to the 

proper use and maintenance of the 

EASYTRACK. 

It will help protect your product 

as well as ensure that it performs to your 

satisfaction.
Lifting and transferring a person always 

presents a potential risk. This manual contains 

safety related information that must be read 

and understood to help prevent injuries.

WARNING

: Arjo strongly advises and warns 

that to avoid injuries that can be attributed to 

the use of inadequate parts, only parts 

designated by Arjo should be used on 

product and other appliances supplied by 

Arjo.

WARNING

:  Unauthorized  modifications  on 

any Arjo product may affect its safety. Arjo 

will not be held responsible for any accidents, 

incidents or lack of performance that occur 

as a result of any unauthorized modification 

to its products.

Do not attempt to service or repair the 

EASYTRACK

. If any item is defective, contact 

your local Arjo vendor.
If a serious incident occurs in relation to this 

medical device, affecting the user, or the patient 

then the user or patient should report the 

serious incident to the incident to the medical 

device manufacturer or the distributor. In the 

European  Union,  the  user  should  also  report 

the serious incident to the Competent Authority 

in the member state where they are located.

Service and Support

A service routine has to be done on your 

EASYTRACK 

by Arjo trained service personnel. 

This will ensure it remains safe and functional.
Please contact your local Arjo vendor for any of 

the following:

•  If you require further information.

•  Want to report an unexpected event, 

change in the performance or a 

malfunction.

•  Need any help in setting up, using or 

maintaining your 

EASYTRACK.

•  Need replacement parts

.

Your Arjo vendor can offer support and service 

programs to maximize the long-term safety, 

reliability and value of the product.
Additional copies of this manual can be 

purchased from your local Arjo agent. When 

ordering, include the 

Instructions for Use 

part 

number (see front page). 

Manufacturer Information

This product was manufactured by:
ArjoHuntleigh AB 

Hans Michelsensgatan 10 

211 20 Malmö 

SWEDEN

Definitions Used in this Manual

WARNING

Means: Failure to understand and follow this 

instruction may result in injury to yourself and 

others.

CAUTION

Means: Failure to follow this instruction may 

cause damage to the product(s).

NOTE

Means: Important information regarding correct 

use of the product.

Foreword

Summary of Contents for EASYTRACK 9330010

























Reviews: