background image

Clip Slings Application

11

Sling Selection

The spreader bar that is attached to the lift 

determines what slings can be used to transfer 

a patient. 

6OLQJV DUH FRORXU FRGHG IRU VL]H E\ KDYLQJ D

different colour edge binding or attachment 

strap colouring:

• 

7HDO([WUD([WUD6PDOO;;6

• 

%URZQ([WUD6PDOO;6

•  Red - Small - S
•  Yellow - Medium - M
•  Green - Large - L
•  Purple - Large Large - LL
• 

%OXH([WUD/DUJH;/

• 

7HUUDFRWWD([WUD([WUD/DUJH;;/

Note that some sling models are not available 

LQDOOVL]HV

A wide variety of slings are available for each 

application. Please contact your local Arjo 

 

vendor for more information.
Flites

®

 (single patient multi-use slings) are also 

available for most sling models. If Arjo 

Flites

 

slings are to be used with the  

MAXI 500

ÀRRUOLIW

refer to the separate Arjo 

Flites

 slings 

Instruction 

for Use

.

Spreader Bar Compatibility

The 

Maxi 500

ÀRRUOLIW

is only compatible 

with the spreader bar 

that is delivered with 

the lift. 

Maxi 500

 ÀRRU OLIW

model that is 

designed for use with 

clip slings is delivered 

with a manual DPS 

spreader bar.  

 

WARNING

 8VLQJ WKH '36 ZLWK DPSXWHH

sling may cause injuries if not used correctly.

Fig. 12 

Legs

Shoulders

Attachments Lugs

Summary of Contents for Maxi 500









































Reviews: