4
C
Preparation for Use
Before commencing to lift the patient, ensure that all
the actions and checks in this Preparation section are
carried out.
Unpack the battery pack supplied, and fully charge
it as described in “Battery Charging section”.
When the battery pack is charged, disconnect the
mains power, then remove the pack from the charger
and insert it fully into the Sara 2000 battery
compartment, located at the lower rear of the mast.
(See fig. 2). Electrical connection is made
automatically.
Ensure that the green reset button, (situated at the
top of the battery compartment), is pressed in. (See
inset to fig 1).
Your Sara 2000 is now ready for use.
P.
10
67g
Fig. 2