001.23104.EN rev
. 6
Electromagnetic Compatibility
32
(continued)
Recommended Separation Distance Between -
Portable and Mobile RF Communications Equipment and the
MAXI LITE
for Equipment
and Systems that are not Life-Supporting
Recommended separation distances between portable and mobile RF communications
equipment and the
MAXI LITE
.
The
MAXI LITE
is intended for use in electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the
MAXI LITE
can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communication equipment (transmitters) and the
MAXI LITE
as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
Separation distances according to frequency of transmitter m
150 KHz to 800 MHz 800 MHz to 2.0 GHz
2.0 GHz to 2.5 GHz
0.01
0.12
0.07
0.23
0.1
0.37
0.22
0.74
1
1.17
0.70
2.33
10
3.69
2.21
7.38
100
11.67
7.00
23.33
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
