Service Procedures
12
0
0
1
.1
60
1
0.
3
3 re
v
. 8
Folding Arm Replacement
Required tools:
•
Small flat head screwdriver
•
Long nose pliers
• Plastic
hammer
• Punch
1. Refer to "Main Plastic Cover Replacement” on page 9 to remove the plastic covers.
2. Locate the folding supports and remove both retaining clips
using a small flat head screwdriver.
3. Push out both clevis pins from the folding arm using the punch
and the plastic hammer.
4. Replace the arm. Make sure to align holes.
Reinsert both clevis pins with a plastic hammer. No grease is
required on clevis pins. Mate both clevis pin’s flat sides to
prevent them from turning.
5. Reinstall both retaining clips.
6. Verify arm operation by rotating it back and forth.
7. Make sure that the safety latches are in place and that they
revert to closed position when they are released.
8. Refer to "Main Plastic Cover Replacement” on page 9 to
reinstall both covers.
