SERIES
-
B
-
3
-
Safety Instructions
1. Prior to installation or handling of the filter, read carefully the installation and operation
instructions carefully.
2. Confirm filter draining prior to service.
3. Take precautions while lifting, transporting or installing the filter.
4. Installation of the filter should be performed so as to avoid direct water splashing on any
of the filter parts and especially on the electronic control unit.
5. Confirm that filter weight, when full, meets the support construction requirements.
6. Prior to installation confirm that line pressure matches filter’s operational pressure.
7. During installation, use standard flanges and connections only.
8. Check that all filter flange bolts are properly secured.
9. Please note, the filter enters a flushing mode automatically, without prior warning.
10. Use original parts only when servicing the filter.
11. Arkal cannot accept responsibility for any changes or modifications to the equipment.
