Arkbird FPV
-1-
Arkbird V3.1028 Features:
ARKBIRD is a high-accuracy autopilot designed for fixed-wing. It can superimpose OSD(OnScreenDisplay) data
on videos and at the same time control the balance, the return and many other maneuvers of your aircraft with
high precision.
The perfect auto-stabilization system and a plug-and-play design free you from worries and inconveniences
and enjoy the beauty of FPV in an instant.
1. Function all in one broad, on broad IMU (Inertial measurement unit), OSD (On Screen Display), barometer
Attitude sensor, 12V-5V regulation chip, “ESC + voltage regulation” dual power supply. Industrial reliable
designed.
2. Plug & Play design, no needed to weld any wire, Adjust parameters by OSD menu and radio stick.
3. Intelligent PID controller. Easy to adjust, support delta-wing, V-tail plane.
4. One button auto-leveling, one button RTH (return-to-home), lost radio signal return-home.
5. Cruise flight (Keep straight &constant-height flight).
6. Gyro normal balance and 3D balance. Hover mode.
7. Fence mode
（
Auto Switching to Return-to-Home Mode while flying out of the rectangle area specified.
）
8. 4 Way point flight, coordinate set by radio stick.
9. "Launch Assist" function which can help to control throttle and elevate angle when take-off.
10.RSSI port available, 10 channel PPM port supportable.
11.Compatible with Arkbird airspeed sensor.
One board OSD features:
1. Power & OSD Voltage display, 3D Go-home arrow, radar mark, flight time, horizon, total distance, and power
consumption.
2. Customized interface: can set Fighter HUD interface, Simple interface, can choose the font size, the
demands of latitude and longitude.
3."Flight Record" records the time, voyage, data of power consumption and various maximum records of the
flights.
Reminding
：
For the first installation
，
please power up after a wire check. Forcible satellite search interface will be
entered (incontrollable) every time you power up. You can pop-up manually and adjust rudder angle in Manual
Mode and auxiliary control in Balance Mode. A Neutral Point Check for the sensor is necessary. Also, you need a
fail-safe protection for the receiver in case your autopilot loses control when returning home. Adjust the OSD
