Details:
REC → Video button
MODE → Function button
LED → Status, at the middle of the REC and MODE keys
TF Card Slot → At the back of the camera
Video size is 3Mb/second @2K, One 64G card is recommended, Max video
recording time are 6 hours. When TF card is full, the camera will loop the video and
delete the earlier videos automatically.
The port behind the camera is: Power , Video , PWM , Ground
(This port supports 7-26V, you can use 2S-6S battery (only for camera!))
Usage
：
Video function
：
The camera will start recording automatically when it's power up, and the red
led light will flash at the same time indicating so. Short pressing “REC” key you can
start/stop video.
How to switch camera resolution ratio:
Step 1
：
Press “REC” key, the red led light will flash;
Step 2
：
Press “MODE” key for 3 seconds, both the red and blue led
lights will flash 3 times.
How to distinguish current resolution ratio:
1. Red led light flash 1 time/second, the resolution ratio is 1080p/60fps;
2. Red led light flash 2-3 times/second, the resolution ratio is 2k/30fps.
How to switch PAL/NTSC Mode:
Step 1
：
Disconnected camera power;
Step 2
：
Press the “MODE”key and power up at the same time, waiting for
the indicator light flashes, then loose the key.
How to distinguish the current Mode:
1.
The blue led light is ON. → PAL Mode
2.
The blue led light is flashing. → NTSC Mode
