13
SECTION
B
Step 3:
Meter will count down by showing “7”. The meter will show the result in
7 seconds.
Option: Flagging Test Result in Memory
• Results may be marked with an “!” if you feel the result
is incorrect or the test procedure was not followed correctly.
• Mark the test result with an “!” by pressing either the
Forward or Back button after result is on screen.
Marked results will not be included in the 7-, 14-, 30-,
or 90–day averages.
NOTE:
Healthcare Professionals: Record test result in patient’s chart.
Step 4:
The flashing arrow reminds you to remove the test strip.
Remove the test strip by holding the meter so that the
test strip points down. Push the test strip release button forward.
Dispose of test strip. The meter shuts off automatically when you
remove the test strip.
NOTE:
Results will be shown in units of mg/dL. Results will not show a decimal point.
mg/dL
am
mg/dL
am
mg/dL