SECTION
C
33
Name of facility:
SELF-TEST
Assure
®
Platinum Blood Glucose Monitoring System:
The following is a multiple choice self-test that is designed to test your proficiency in using
the Assure
®
Platinum Meter. Answer the questions by circling the letter of the statement that
is CORRECT. Check your answers against the correct answers, which are located at the end
of the test. More than one answer may be acceptable on some questions.
If you respond incorrectly to any of the questions, make sure you study the section or talk to
your instructor.
1. The Assure Platinum Meter
a. Uses reflectance technology
b. Uses biosensor technology
c. Stores up to 500 tests in memory
d. Can be used with any brand of test strips
2. The Assure Platinum Test Strips
a. Have a CODE chip that is packaged with every box of test strips
b. Can be used with other meters besides the Assure Platinum
c. Are not sensitive to light, moisture, and humidity
d. Do not require you to code the meter; they are auto-coding
3. When obtaining a blood sample
a. You should not wash the patient’s hand
b. Hang the patient’s arm down below their heart for 10 to 15 seconds
to increase blood flow
c. You should lance the side of fingertip
d. You should use the same site selection of the fingertip each time
4. When performing a test with control solutions
a. Solutions should be applied to test strip before it is inserted into the meter
b. The test strip must be in the meter before solutions are applied
c. Use any brand of control solutions
d. Press the “M” Button to enter control solution mode prior to applying
solution to the test strip
5. Assure Dose Control Solutions
a. Are for cleaning the meter
b. Are used to verify that the test strips are reacting properly
c. Are good for 90 days after opening
d. Should be used if strips have been exposed to extremes in temperature,
light, or humidity
6. When applying blood to the Assure Platinum Test Strips
a. Smear the blood sample
b. Apply it to the reaction site of the test strip
c. Apply it to the sample application tip
d. If meter does not start after adding the first blood drop, you may apply a second drop.