www.arkrayusa.com
29
Control Solution Testing
Step 1
Insert a test strip into the meter’s test strip
port, with the contact bars facing upwards.
Gently push the test strip into the test strip
port until the meter beeps. Be careful not to
bend the test strip while pushing it in.
The
symbol will appear.
Step 2
You can flag the control solution test result by
pressing the > button for three (3) seconds. To
undo the control solution flag, press the > button
for three (3) seconds again.
Use GLUCOCARD® Shine Control Solution when:
• You want to practice the test procedure using the control
solution, instead of blood.
• You use the meter for the first time.
• You begin using a new vial of test strips.
• You suspect the meter or test strips are not working properly.
• You think your test results are inaccurate or they do not reflect
how you feel.
• The meter is dropped or damaged.
