Symbols
The following symbols are used in this manual and the labels on this instrument to call
your attention to specific items.
For Your Safety
Unpacking
The package should contain the components listed below. Check to see if everything
is included. If anything is missing or damaged, contact your distributor.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
The electromagnetic environment should be evaluated prior to operation of the
device. Do not use this device in close proximity to sources of strong
electromagnetic radiation, as these may interfere with the proper operation.
The printer must be directly attached to the instrument in order to
use it. Therefore, the printer can also be contaminated by pathogenic
microorganisms. Take care when attaching, detaching and storing
the printer to prevent exposure to pathogenic microorganisms.
Follow the instructions given here to prevent exposure to pathogenic
microbes.
PocketChem printer
Printer paper
Operating manual
(this manual)
Stylus pen
(Stored in the printer)
