3
4
5. The Charging Methods for Remote Control:
6. Detailed Key Functions:
The remote control has 18 function keys and 1 touch
circle.
color
7. System Diagram:
ON OFF
/
CT+/CT-
SPEED+
SPEED-
BRT+
BRT-
CT
SHORTCUT KEYS
SCENE-SAVE KEYS
BRT
SHORTCUT KEYS
Turn on or turn off the receiver.(turn on or turn off light)
DELAY OFF KEYS
●
●
●
●
●
●
●
●
●
●
●
Long press for 3 seconds to memorize the current color
temperature status. Can memorize three groups’ color temperature
status in total.
Press the keys to quickly select the high, medium or low color
temperature status.
Press the keys to delay power off (or turn off the lights) in 30
seconds or 1 hour.
Press either key to enter the color temperature gradual mode.
Press the keys to adjust the brightness.
Keep pressing to adjust brightness continuously.
Press the keys to increase or decrease the color temperature
of the LED.
OUTPUT
O
U
T
P
U
T
O
U
TP
U
T
O
UT
PU
T
OU
TP
UT
OU
TP
UT
OUTPUT
OU
TP
UT
OU
TPU
T
O
UT
PU
T
O
U
TP
U
T
O
U
T
P
U
T
OUTPUT
O
U
T
P
U
T
OUTP
UT
OUTPUT
OUTP
UT
OUTPU
T
OUTPUT
OUT
PUT
OUTP
UT
OUTPUT
OUTP
UT
O
U
T
P
U
T
Unlimited receivers can be installed within effective distance, no wiring needed between the receivers,
which can be less or more in quantity according to your need for the installation, if you want to increase
or decrease the receivers, just activate or cancel the control ID on the remote control will be fine, no any
changes and effects on the other receivers.
1. When charging, please connect USB cable to the mobile charger or computer with the USB interface.
Press the keys to quickly select the high, medium or low level
of brightness for current color temperature.
Remote Control Sign
Description
Key
The learning of remote control:
Learning ID:
If you want to control multiple receivers
synchronously, just follow the above instructions for each
receiver.
Cancelling ID:
Press any key on the remote control within 5 seconds, until the green LED indicator light
flashes
3 times (a voice prompt at the same time), means the controlling between the remote control and
receiver is activated, release the button on the receiver and remote control when the learning is
finished.
Press any key on the remote control over 5 seconds, until the red LED indicator light
flashes 3
times(a voice prompt at the same time), means the controlling between the remote control and receiver
is cancelled, release the button on the receiver and remote control when the deleting is finished.
Press “ID learning button”
on the receiver for 2 seconds, there is a buzzer sound, now according to the following
steps learning ID and deleting ID:
★
Other function: press “DELAY OFF KEY”
in 3 seconds, the buzzer can be on or off.
5. Please make sure more than 40% battery remaining on the remote control for long time no use, and it needs
to be charged at least every half year, otherwise the capacity of the battery would be decreased or the battery
gets damaged.
4. Red indicator light flickers meaning low battery and need to be charged. Charging in low battery will affect life of
battery.
3. No memory effect in the lithium battery of remote control. Follow the standard charging procedure even for the
first three times, no need over charge.
2. The blue indicator light flickers while charging, and turns green means the charging is completed. The remote
control can be chargeable even at the OFF state, on which the indicator light is black.
Keep pressing to adjust the color temperature continuously.
Press again to increase or decrease the gradual speed.
